Konica Minolta drypro 832 Service Manual page 267

19
Repeat the step 18 and measure the center of each patch in the <2>, <4>, and <5> rows, using
the densitometer, and determine the number (OFFSET) nearest to the base value measured in
step 17 of the patches from (01) to (13).
Write down the number (OFFSET) determined on the film.
20
Specify the number (OFFSET) determined in
21
Click the [END] button.
The window appears, confirming saving.
22
Click the [YES] button.
The "CORRECTION (STEP4)" window is closed. Then you will return to the maintenance menu window.
Chapter 14 Setting and Adjustment
step 18 to step 19 in each entry field "OFFSET".
14-11