Print Queue/Delete - Konica Minolta drypro 832 Service Manual

15.2 Print Queue/Delete

The status and information for print jobs in DRYPRO 832 can be confirmed, and print jobs can be deleted.
Set print parameters for each connected diagnostic device.
1
Refer to "15.1 DRYPRO 832 Utility Tool Start (Page
window of the DRYPRO 832 Utility Tool.
2
Click the [PRINT QUEUE/DELETE] button in the "PRINT INFO".
The "PRINT QUEUE/DELETE" window appears.
"PRINT QUEUE/DELETE" Window
The "PRINT QUEUE/DELETE" window contains the following items:
No. Setup Items
1 No.
2 RECEIVE TIME
3 PAGE
4 SIZE/TYPE
5 COPY
6 FORMAT
7 [DELETE] button
15-2)", and open the maintenance menu
Description of Setting
The print job number is shown.
The date and time that the image was received is shown.
The page number of the output film attached to each diagnostic device is shown.
The size and type of the film to be output will be displayed.
The number of pages printed or copied will be shown.
The number of frames is shown.
The selected job is deleted.
Chapter 15 DRYPRO 832 Utility Tool
15-7