Konica Minolta drypro 832 Service Manual page 302

Chapter 15 DRYPRO 832 Utility Tool
No. Setup Items
6 POWER OFF
MODE
7 SLEEP MODE
TIMER
8 BUZZER
9 LOG WRITE
MODE
10 TOTAL
OPERATING TIME
(Display only)
11 TOTAL PRINTED
SHEETS
(Display only)
12 VERSION
(Display only)
13 [SAVE] button
14 [BACK] button
3
Set each item according to the status of use in the facility.
4
Click the [SAVE] button.
Save the changes and close the "SYSTEM SETUP" window to return to the DRYPRO 832 Utility Tool Maintenance
Menu window.
If the network settings of "IMAGER NAME" were changed, restart the DRYPRO 832.
15-26
Description of Settings
Set the power OFF mode interfaced with Printlink5-IN.
Default value: OFF
OFF The power OFF mode is not used.
ON (with The power OFF mode is used.
temperature (Since the temperature inside the main unit is maintained even after
control) power is turned OFF, the warm-up period during the start-up
process will be approximately 3 minutes.)
ON (without The power OFF mode is used.
temperature (Since the temperature control inside the main unit is not performed
control) after power is turned OFF, the warm-up period during the start-up
process will be approximately 10 minutes.)
For more information, see "
Set the sleep mode timer to ON/OFF when the DRYPRO 832 is not used, and set
the period of time before shifting into sleep mode.
Default value: OFF
ON The sleep mode timer function is used.
OFF The sleep mode timer function is not used.
sec Enter the period of time before shifting into sleep mode. This value
can only be set when the sleep mode timer function is "ON".
Default value: 120 min
Set the operation unit buzzer sound ON/OFF when an error or empty occurs in
DRYPRO 832.
Default value: ON
ON The operation unit buzzer sounds for approximately 1 second.
OFF The operation unit buzzer does not sound.
Set the log output status.
Default value: NORMAL
NORMAL Output in normal mode.
DETAIL Output in detail mode.
The total operating time of DRYPRO 832 is shown.
Default value: 0
The total number of sheets output to DRYPRO 832 is shown.
The total number of printed sheets includes the number of sheets of film output
during calibration performed when the machine was installed.
Default value: 0
The currently active software version is displayed.
When the software is upgraded, confirm using this value.
Default value: Varies depending on shipment time.
Save the changes and close the "SYSTEM SETUP" window to return to the
DRYPRO 832 Utility Tool Maintenance Menu window.
Discard the changes and close the "SYSTEM SETUP" window to return to
DRYPRO 832 Utility Tool Maintenance Menu window.
About Power OFF Mode (Page 15-27)".