The Basic Operations volume of the Instruction Manual contains details on the operation of the various functions. When using the Enlarge Display mode, first read the Basic Operations volume before referring to the Enlarge Display Mode Operation Guide. Konica 8020/8031...
To make settings for the “Postcard” function........ 1-23 Making Copies for Filing (“Image Shift” Function) ....1-25 To make settings for the “Image Shift” function......1-25 Erasing Sections of Copies (“Edge/Frame Erase” Function) ..........1-27 To make settings for the “Edge/Frame Erase” function....1-27 Konica 8020/8031...
Page 6
Scanning the Document in Separate Batches (“Separate Scan” Function) ............1-38 To set the “Separate Scan” function ..........1-38 1.10 Printing Control Numbers on Copies (“Distribution” Function)............1-40 To make settings for the “Distribution” function......1-40 Scanning Operations Available Scanning Features ............2-2 Function Descriptions..............2-2 Operation Description ..............2-3 Konica 8020/8031...
Page 7
Enlarge Display Mode Operation Guide For details on the following topics, refer to the Enlarge Display Mode Operation Guide. 1 Before Making Copies 2 Basic Copy Operations 3 Copy Paper 4 Original Documents 5 Specifying Copy Settings 6 Job List Konica 8020/8031...
Available Features Available Features This chapter contains many useful copy samples that will give you a better understanding of the wide range of applications for the various functions available with this full-color copier. These functions are explained in an easy-to-understand way using the many copy samples.
Page 9
o nt ent s ont ent s “Color Image Adjust” Function General Information “Brightness” About Color Parameter ..p ..p Adjusts the brightness “Red” “Contrast” Parameter Parameter ..p .
Contents “Creation” Functions “Monotone” “Postcard” Function Function ..p . . p Copies using only one selected color (monotone) Prints multiple copies of the document, reduced to postcard size, on a single sheet of paper “Background Color” “Mirror Image”...
Page 11
General Information About Color General Information About Color What is hue? Everybody has an idea of what hue an object has, for example, an apple is red, a lemon is yellow, and the sky is blue. Hue is the tint by which the color of an object is classified as red, yellow, blue, etc.
“Color Image Adjust” Function Relationship between hue, brightness and saturation (color model) Hue, brightness and saturation are the elements that we call the “three attributes of color”. We can think of their affects using the solid object shown in figure 1, where the outer edge is the hue, the vertical axis is the brightness, and the horizontal axis from the center is the saturation.
Page 13
“Red” Parameter “Red” Parameter p.1-7 This parameter can be used to adjust the degree of red in the image to one of seven levels. Original – 3 Sample images...
Page 14
“Color Image Adjust” Function “Green” Parameter “Green” Parameter p.1-7 This parameter can be used to adjust the degree of green in the image to one of seven levels. Original – 3 Sample images...
Page 15
“Blue” Parameter “Blue” Parameter p.1-8 This parameter can be used to adjust the degree of blue in the image to one of seven levels. Original – 3 Sample images...
Page 16
“Color Image Adjust” Function “Portrait” Parameter “Portrait” Parameter p.1-10 This parameter can be used to adjust the tint of fresh color to one of seven levels. Original – 3 Sample images...
Page 17
“Color Balance” Parameter “Color Balance” Parameter (CMYBK color adjustment) By mixing the four toner colors (yellow, magenta, and cyan in addition to black) in a full-color copy, the colors of the document can be reproduced. Changing the amount of each color of toner enables the tints in the copy to be finely adjusted.
Page 18
“Color Image Adjust” Function p.1-9 Yellow Increasing the amount of yellow Increasing the red tinge Increasing the green tinge Decreasing the Decreasing the amount of cyan amount of magenta Original Increasing the Increasing the amount of magenta amount of cyan Decreasing the amount of yellow Magenta...
Page 19
“Brightness” Parameter “Brightness” Parameter p.1-5 This parameter can be used to finely adjust the brightness of the image to one of 19 levels. Original – 3 Sample images...
Page 20
“Color Image Adjust” Function “Contrast” Parameter “Contrast” Parameter p.1-5 This parameter can be used to finely adjust the image to one of 19 levels between soft/smooth and crisp. Original – 3 Sample images...
Page 21
“Saturation” Parameter “Saturation” Parameter p.1-6 This parameter can be used to finely adjust the vividness of the image to one of 19 levels. Original – 3 Sample images...
Page 22
“Color Image Adjust” Function “Sharpness” Parameter “Sharpness” Parameter p.1-6 This parameter can be used to adjust the amount of contours in text and images to one of seven levels. Original – 3 Sample images...
Page 23
“Hue” Parameter “Hue” Parameter p.1-10 This parameter can be used to finely adjust the hue of the image to one of 19 levels. Original – 3 Sample images...
Page 24
“Color Image Adjust” Function “Density” Parameter “Density” Parameter p.1-11 This parameter can be used to finely adjust the light and shading of the image to one of 19 levels. Original – 3 Sample images...
Page 25
“Monotone” Function “Monotone” Function p.1-14 This function allows you to copy a document using only one of the 20 colors available. Yellow Sepia 1 Magenta Sepia 2 Cyan Camel Brown Forest Green Green Maroon Orange Plum Pumpkin Yellow Purple Green Blue Pink Aquamarine...
“Creation” Function “Background Color” Function “Background Color” Function p.1-15 This function allows you to copy a document using one of the 18 colors available as the color of the background (blank areas). Yellow Camel Brown Magenta Cyan Forest Green Maroon Green Plum Purple...
Page 27
“Color Separation” Function “Color Separation” Function p.1-16 This function allows you to copy a document while separating its colors into yellow, magenta, cyan and black. In addition, copies of the separated colors can also be printed in just black. Original Copies of the separated colors Yellow Magenta...
Page 28
“Creation” Function “Neg. Pos. Reverse” Function “Neg. Pos. Reverse” Function p.1-16 This function allows you to copy a document with the light-colored areas and the dark-colored areas of the image inversed. Monotone copy Yellow Sepia 1 Magenta Sepia 2 Cyan Camel Brown Forest Green...
“Postcard” Function “Postcard” Function p.1-23 This function allows you to reduce the document to the size of a postcard, and print four copies on one sheet of paper. Original “Mirror Image” Function “Mirror Image” Function p.1-21 This function allows you to copy a mirror image of the original document.
Page 30
“Creation” Function “Multi-Page Enlargement” Function “Multi-Page Enlargement” Function p.1-17 This function allows you to copy a document automatically split into parts with each part printed enlarged. These copies can then be pasted together to make a large poster. Original 400%...
Basic Operations volume. Select the desired Color setting. • For more details, refer to “Selecting the Color Setting” in Chapter 5 “Specifying Copy Settings” in the Basic Operations volume. Touch [Auxiliary]. The Auxiliary screen appears. Touch [Color Image Adjust]. Konica 8020/8031...
Page 34
1-4. In the Color Adjustments screen, touch [Enter]. The Auxiliary screen appears again. Specify any other necessary settings. Press the [START] key. The copy job is queued for printing with the selected color adjustment settings. Konica 8020/8031...
Press the [START] key. ❍ The copy job is queued for printing, and test prints are printed. The parameter screen appears again. While referring to the test prints, touch to select the desired setting for the current parameter. Konica 8020/8031...
[Enter]. To adjust the “Contrast” parameter This parameter can be used to make the image either crisper or smoother. In the Color Adjustments screen, touch [Contrast]. Touch to select the desired setting, and then touch [Enter]. Konica 8020/8031...
In addition, this parameter can be used to make an overly sharp image softer or a blurry image clearer. In the Color Adjustments screen, touch [Sharpness]. Touch to select the desired setting, and then touch [Enter]. Konica 8020/8031...
This parameter can be used to adjust the level of green in the image, for example, when you wish to emphasize the green of forests and trees. In the Color Adjustments screen, touch [Green]. Touch to select the desired setting, and then touch [Enter]. Konica 8020/8031...
This parameter is used to adjust the level of blue in the image, for example, if you wish to add blue to water or the sky. In the Color Adjustments screen, touch [Blue]. Touch to select the desired setting, and then touch [Enter]. Konica 8020/8031...
To increase the black tinge Increasing the amount of black In the Color Adjustments screen, touch [Color Balance]. Select the color that you wish to adjust, and then touch to specify the desired setting. After specifying the settings, touch [Enter]. Konica 8020/8031...
The hue is divided into magenta, yellow and cyan. By adjusting the hue, the image can be made either more reddish or more bluish. In the Color Adjustments screen, touch [Hue]. Touch to select the desired setting, and then touch [Enter]. 1-10 Konica 8020/8031...
To adjust the “Density” parameter This parameter can be used to adjust the copy density to any of 19 levels between -3 and +3. In the Color Adjustments screen, touch [Density]. Touch to select the desired setting, and then touch [Enter]. Konica 8020/8031 1-11...
Basic Operations volume. Select the desired Color setting. • For more details, refer to “Selecting the Color Setting” in Chapter 5 “Specifying Copy Settings” in the Basic Operations volume. Touch [Auxiliary]. The Auxiliary screen appears. Touch [Creation]. 1-12 Konica 8020/8031...
Page 44
(Example: Setting the “Monotone” function) In the Creation screen, touch [Enter]. The Auxiliary screen appears again. Specify any other necessary settings. Press the [START] key. The copy job is queued for printing with the selected “Creation” functions. Konica 8020/8031 1-13...
Touching [Solid] so that it is not selected specifies that the document will be copied with the original color differences (color shading that can be seen with the eye). To cancel the “Monotone” function, touch [Cancel] in either Monotone screen. 1-14 Konica 8020/8031...
Touch [Background Color 2] in the lower- right corner to display the next screen. Touch [Background Color 1] to return to the previous screen. To cancel the “Back- ground Color” func- tion, touch [Cancel] in either Background screen. Konica 8020/8031 1-15...
If the “Monotone” function was set, the negative/positive inverse of the im- age will be printed with the selected color. If the “Background Color” function was set, the negative/positive inverse of the image will include the selected background color. 1-16 Konica 8020/8031...
[Photo Size or Custom Size]. Select a photo size, or touch [X] and [Y], and use the keypad to specify the size of the original. Then, touch [Enter] to return to the Multi-Page Enlargemt. screen. Konica 8020/8031 1-17...
Page 49
To specify the paper size for each part of the enlarged image Skip to step 8. Touch [Image Size]. Select the final image size, and then touch [Enter]. ❍ For final image sizes in inch measurements, touch [Inch]. Select the desired image size, and then touch [Enter]. 1-18 Konica 8020/8031...
Page 50
[Enter]. This concludes the setting procedure for the “Multi-Page Enlargement” function. Touch [Zoom Ratio]. Using the keypad, enter the desired zoom ratio, and then touch [Enter]. This concludes the setting procedure for the “Multi-Page Enlargement” function. Konica 8020/8031 1-19...
Page 51
[Enter]. ❍ For paper sizes in inch measurements, touch [Inch], select the desired paper size, and then touch [Enter]. To cancel the “Multi-Page Enlargement” function, touch [Cancel] in the Multi-Page Enlargemt. screen. 1-20 Konica 8020/8031...
[Size Input], and then touch [Photo Size or Custom Size]. Select a photo size, or touch [X] and [Y], and use the keypad to specify the size of the original, and then touch [Enter]. Konica 8020/8031 1-21...
Page 53
For document sizes in inch measurements, touch [Inch], select the desired paper size, and then touch [Enter]. In the Mirror Image screen, touch [Enter]. To cancel the “Mirror Image” function, touch [Cancel] in the Mirror Image screen. 1-22 Konica 8020/8031...
[Multi-Original]. In this case, the margins are reduced by the image at the edge of the paper. Normally, the document size is automatically detected. However, if you wish to specify the document size, touch [Size Input]. Select the document size, and then touch [Enter]. Konica 8020/8031 1-23...
Page 55
[Enter]. ❍ For document sizes in inch measurements, touch [Inch]. Select the desired paper size, and then touch [Enter]. In the Postcard screen, touch [Enter]. To cancel the “Postcard” function, touch [Cancel] in the Postcard screen. 1-24 Konica 8020/8031...
Documents” in the Basic Operations volume. Select the desired Color setting. ❍ For more details, refer to “Selecting the Color Setting” in Chapter 5 “Specifying Copy Settings” in the Basic Operations volume. Touch [Auxiliary]. The Auxiliary screen appears. Touch [Image Shift]. Konica 8020/8031 1-25...
Page 57
Specify the orientation of the original, and then touch [Enter] to return to the Basic screen. Specify any other necessary settings. Press the [START] key. To cancel the “Image Shift” function, touch [Cancel] in the Image Shift screen. 1-26 Konica 8020/8031...
Documents” in the Basic Operations volume. Select the desired Color setting. ❍ For more details, refer to “Selecting the Color Setting” in Chapter 5 “Specifying Copy Settings” in the Basic Operations volume. Touch [Auxiliary]. The Auxiliary screen appears. Konica 8020/8031 1-27...
Page 59
Original (A3L) Copy (A5L) × 0.5 20 mm 10 mm Normally, the document size is automatically detected. However, if you wish to specify the document size, touch [Size Input]. Select the document size, and then touch [Enter]. 1-28 Konica 8020/8031...
Page 60
Select the desired paper size, and then touch [Enter]. In the Edge/Frame Erase screen, touch [Enter]. Specify any other necessary settings. Press the [START] key. To cancel the “Edge/Frame Erase” function, touch [Cancel] in the Edge/ Frame Erase screen. Konica 8020/8031 1-29...
(without changing the proportions of the image), touch [Center Zoom]. If [Center Zoom] is selected, the center of the image will be positioned at the center of the paper. In addition, both ends of the longer sides are lost since they extend off the paper. 1-30 Konica 8020/8031...
Page 62
Select the desired paper size, and then touch [Enter]. In the Image Adjustment screen, touch [Enter]. Specify any other necessary settings. Press the [START] key. To cancel the “Image Adjust” function, touch [Cancel] in the Image Adjust- ment screen. Konica 8020/8031 1-31...
[Multi-Full Original]. ❍ To make copies so that the paper is filled regardless of the margins, touch [Multi-Original]. In this case, the margins are reduced by the image at the edge of the paper. 1-32 Konica 8020/8031...
Page 64
Select the desired paper size, and then touch [Enter]. In the Image Repeat screen, touch [Enter]. Specify any other necessary settings. Press the [START] key. To cancel the “Image Repeat” function, touch [Cancel] in the Image Repeat screen. Konica 8020/8031 1-33...
(1st drawer). Konica recommends that interleaf paper (inserted paper) with the same size as the overhead transparencies first be loaded into any drawer other than the mul- tipurpose paper drawer (1st drawer) with the same orientation as the overhead transparencies.
Page 66
1.7 Inserting Pages Between Copies of Transparencies (“OHP Interleaving” Function) Specify any other necessary settings. Press the [START] key. To cancel the “OHP Interleaving” function, touch [Cancel] in the OHP Inter- leaving screen. Konica 8020/8031 1-35...
Press the [START] key. To combine scanned data saved in the memory Touch [Job Control]. The Scanned Job screen appears. Touch [Combine Jobs]. A list of jobs stored in the memory and that can be combined appears. 1-36 Konica 8020/8031...
“Job Stored” to “Waiting Print”, and the job is queued for printing. For more details on deleting scanned data from the memory, refer to “Scanned Job Screen” in Chapter 6 “Controlling Jobs” in the Basic Operations volume. Konica 8020/8031 1-37...
Specify any other necessary settings. Position the document(s) to be copied. ❍ For more details, refer to “Feeding the Document” in Chapter 4 “Original Documents” in the Basic Operations volume. Press the [START] key. Repeat steps 4 and 5. 1-38 Konica 8020/8031...
Page 70
1.9 Scanning the Document in Separate Batches (“Separate Scan” Function) After all pages of the document have been scanned, touch [Finish], and then press the [START] key. Konica 8020/8031 1-39...
❍ If a control number is set, the copier automatically selects the “Sort” setting. Using the keypad, enter the first control number to be printed. ❍ The first control number can be set between 001 and 999. 1-40 Konica 8020/8031...
Page 72
If the first control number is not set, the control numbers start from 001. ❍ After the control numbers reach 999, they return to 000. Specify any other necessary settings. Press the [START] key. To cancel the “Distribution” function, touch [Cancel] in the Distribution screen. Konica 8020/8031 1-41...
Page 73
1.10 Printing Control Numbers on Copies (“Distribution” Function) 1-42 Konica 8020/8031...
2.1 Available Scanning Features Available Scanning Features If an optional printer controller is installed and the Konica 8020/8031 is connected to a network, data scanned with this copier can be attached to e-mail and sent to a computer or Internet fax terminal through an intranet or the Internet. In addition, scanned data can also be uploaded to an FTP server.
Specify the appropriate settings. ❍ Specify the recipient (where the scan data will be sent) and the scanning mode, and then specify any other necessary settings. Press the [START] key to start scanning and sending the data as specified. Konica 8020/8031...
Page 77
2.1 Available Scanning Features Konica 8020/8031...