21
Refer to
step 6
and
7
unit.
22
Install the sub scan unit with reference to
Removing/Installing Sub Scan Unit (Including the Exposure Unit and Position Regulation
Unit)".
23
Return the supply tray and tray shutter to their original positions.
Take sufficient care when handling the tray shutter, as it may be impossible to insert if it
becomes deformed due to rough handling.
Caution
This is the end of the process of replacing the Sub Scan nip motor.
Chapter 7 Replacing Sub Scan Unit Loading Parts
in
"8.2 Replacing Exposure Unit (Page 8-3)"
"
Installation Procedure (Page 7-7)"
and install the exposure
in
"7.2
7-33