9
Install the upper right cover, connector cover, film ejection tray, LAN cover, lower right cover,
and right cover with reference to
Installing Upper Right
Cover".
This is the end of the process of installing the sub scan unit.
Chapter 7 Replacing Sub Scan Unit Loading Parts
8
Close the external guide unit assembly.
"
Installation Procedure (Page 3-15)"
10
Put the supply tray back into the main unit.
11
Remove the tray shutter and return it to the
previous position.
Take sufficient care when handling the tray
shutter, as it may be impossible to insert if it
Caution
becomes deformed due to rough handling.
in
"3.3.3 Removing/
7-9