Konica Minolta drypro 832 Service Manual page 297

No. Setup Items
2 FILM SIZE Select the size of film loaded from pulldown and set for each supply tray.
Default value: 14 × 17
The following film sizes can be selected:
•
•
•
•
•
3 FILM TYPE Select the type of film loaded from the pulldown and set for each supply tray.
Default value :B
B
C
HB
4 COUNT Set the number of sheets of film loaded for each supply tray.
Default value: 0
5 SHEETS OF
Select the number of sheets in a package used in DRYPRO 832 from the pulldown
PACKAGE and set for each supply tray.
Default value: Standard package
125 PACK
50 PACK
6 TRAY SERIES Set operation if film of the same size and type is loaded in both Tray 1 (supply tray)
USE and Tray 2 (Lispl-832).
Default value: ON
ON
OFF
7 [SAVE] button Save the changes and close the "FILM SETUP" window to return to the DRYPRO
832 Utility Tool Maintenance Menu window.
8 [BACK] button Discard the changes and close the "FILM SETUP" window to return to the
DRYPRO 832 Utility Tool Maintenance Menu window.
Settings can be changed under the following conditions.
•
For a supply tray with [TRAY USE] set to [OFF]:
Caution
•
Film size, film type, number of sheets of film, and number of sheets of package cannot
be changed.
•
If an unprocessed job remains in DRYPRO 832:
•
No change can be made to any setting.
Description of Settings
"14 × 17" : 14 × 17 inch-film
"14 × 14" : 14 × 14 inch-film
"11 × 14" : 11 × 14inch-film
"10 × 12" : 10 ×12 inch-film
" 8 ×10" : 8 × 10 inch-film
Blue (Standard density film)
Clear (Standard density film)
HBlue (High density film)
125-sheet package
50-sheet package
Empty notice to the input device is not made when there is film of
the same size and type in Tray 2 (Lispl-832), when the film runs out
in Tray 1 (supply tray).
Same operation is executed when the film count is vice versa for
Tray 1 and Tray 2.
Empty notice is displayed in the operation panel of the DRYPRO
832.
Empty notice to the input device is made even when there is film of
the same size and type in Tray 2 (Lispl-832), when the film runs out
in Tray 1 (supply tray).
Same operation is executed when the film count is vice versa for
Tray 1 and Tray 2.
Chapter 15 DRYPRO 832 Utility Tool
15-21