Chapter 13 Replacing and Cleaning Loading Parts on a Regular Basis
Caution
6
Remove the cover.
• One screw (M3×6) ×2 positions
You can remove the cover by only loosening the screw.
7
Remove the rack retainer plate.
• Two screws (M3×6) ×2 positions
Slightly push in the rack retainer plate inward to make it
easy to remove.
8
Remove V1 rack.
9
Remove V2 rack.
10
Remove V3 rack.
• Four screws (M3×6)
You can remove these screws.
Place the removed rack with the roller side
up at work site. If you place the rack with the
roller side down, the roller and printed film
could get scratched.
13-9