Konica Minolta drypro 832 Service Manual page 262

Chapter 14 Setting and Adjustment
9
Repeat steps from 7 to step 8, and determine the number (PHASE) that has the least
horizontal streak unevenness of the <2> to the <6> rows, and the row-by-row position (SUB
PHASE) that has the least horizontal streak unevenness.
Write down the numbers (PHASE and SUB PHASE) determined on the film.
10
Specify the numbers (PHASE and SUB PHASE) determined in step 7 to step 9 in each entry
field.
11
Click [NEXT(N)].
The "CORRECTION (STEP3)" window appears.
14-6