Adjusting The Printing Position (Image Shift) - Konica Minolta IC-204 User Manual

Setting Up the PCL Driver

Adjusting the printing position (image shift)

You can adjust the printing position on the output paper.
1
Click the Special Functions tab.
2
Select the "Image Shift" check box.
3
Click the [Settings].
4
Set the up/down/left/right shift on the front and back sides or shift of
paper interval in the unit of 0.1mm.
Note
The "Switch Setup" function does not work. Only a setup from Printer
Driver side is possible.
By selecting the "Back Side Auto Setup" check box, the setting becomes
the same as that on the front side.
IC-204
5
5-25