Konica Minolta drypro 832 Service Manual page 41

Chapter 3 Basic Operations
5
Open the right cover by rotating the lever B in the
direction of an arrow.
6
Remove the right cover from the external guide
unit assembly.
Slide the right cover upward, so that the tabs (four places)
inside the right cover are detached from the external guide
assembly, and then remove the cover.
7
Close the front cover and external guide unit
assembly.
8
Remove the lower right cover.
• Four screws (M4×8)
Slide the lower right cover downward so that the tabs (two
locations) on the lower right cover are detached from the
main unit, and then remove the cover.
9
Remove the LAN cover.
3-13