Main Unit Side - Konica Minolta drypro 832 Service Manual

9.2

Main Unit Side

The main unit side of the heat process unit includes the following loading parts.
No.
1 Heat process motor
2 Heat process cooling
fans 1 and 2
3 Deodorant filter detection
sensor
4 Insulation unit fan
5 Deodorant fan
6 Internal temperature
sensor
Chapter 9 Replacing Loading Parts in Heat Process Unit
Name
This motor drives the opposed roller.
For more information, see
12)".
This fan unit cools the heat process unit.
For more information, see
and 2 (Page
This photo sensor detects presence or absence of the Deodorant filter.
For more information, see
Sensor (Page
This fan unit cools the insulation unit.
For more information, see
18)".
This fan unit is used to remove the odor from the inside of the main unit.
For more information, see
This temperature sensor monitors the temperature inside the supply tray.
For more information, see
(Page 9-22)".
Functions and Reference Sections
"9.2.1 Replacing Heat Process Motor (Page 9-
"9.2.2 Replacing Heat Process Cooling Fans 1
9-14)".
"9.2.3 Replacing Deodorant Filter Detection
9-16)".
"9.2.4 Replacing Insulation Unit Fan (Page 9-
"9.2.5 Replacing Deodorant Fan (Page
"9.2.6 Replacing Internal Temperature Sensor
9-20)".
9-11