How To Read This Manual - Konica Minolta drypro 832 Service Manual

How to Read This Manual

Structure of This Manual
This manual provides prior representations for safety and the method for repairing this machine in eighteen chapters
below:
Chapter 1: Safety Precautions and Warnings
This chapter provides basic precautions which should be followed when repairing or using DRYPRO 832.
Thoroughly read this chapter before starting work and instruct users to familiarize with these precautions.
Chapter 2: Before Starting Repair Work
This chapter provides basic knowledge about the product before starting repair work on DRYPRO 832.
Chapter 3: Basic Operations
This chapter describes basic operations when repairing DRYPRO 832, including the procedures for installing or
removing a supply tray and exterior cover, opening or closing covers, and wearing a grounding strap.
Chapter 4: Replacing Supply Unit Loading Parts
This chapter describes how to replace loading parts in the supply unit when they fail and how to adjust after
replacing the loading parts.
Chapter 5: Replacing Tray Unit Loading Parts
This chapter describes how to replace loading parts in the tray unit when they fail and how to adjust after replacing
the loading parts.
Chapter 6: Replacing Lispl-832 (Optional) Loading Parts
This chapter describes how to replace loading parts in Lispl-832 (optional) when they fail and how to adjust after
replacing the loading parts.
Chapter 7: Replacing Sub Scan Unit Loading Parts
This chapter describes how to replace loading parts in the sub scan unit when they fail and how to adjust after
replacing the loading parts.
Chapter 8: Replacing Loading Parts in Exposure Unit
This chapter describes how to replace loading parts in the exposure unit when they fail and how to adjust after
replacing the loading parts
Chapter 9: Replacing Loading Parts in Heat Process Unit
This chapter describes how to replace loading parts in the heat process unit when they fail and how to adjust after
replacing the loading parts.
Chapter 10: Replacing Ejection Unit
This chapter describes how to replace loading parts in the ejection unit when they fail and how to adjust after
replacing the loading parts.
Chapter 11: Replacing Loading Parts in Main Unit
This chapter describes how to replace loading parts in the main unit when they fail and how to adjust after replacing
the loading parts.
Chapter 12: Replacing Loading Parts in the Exterior of Main Unit
This chapter describes how to replace loading parts in the exterior section of the main unit when they fail and how to
adjust after replacing the loading parts.
Chapter 13: Replacing and Cleaning Loading Parts on a Regular Basis
This chapter describes the procedures for replacing and cleaning loading parts on a regular basis.
Chapter 14: Setting and Adjustment
This chapter describes various setting and adjustment procedures for DRYPRO 832.
Chapter 15: DRYPRO 832 Utility Tool
This chapter describes each item of DRYPRO 832 Utility Tool.
ii
.