Konica Minolta drypro 832 Service Manual page 235

7
Install the cover removed in
• Two screws (M3×6)
8
Install the operation panel removed in
9
Install the exterior of the operation panel with reference to
12-5)" in "12.2 Removing/Installing Exterior of Operation
10
Return the supply tray and tray shutter to their original positions.
Take sufficient care when handling the tray shutter, as it may be impossible to insert if it
becomes deformed due to rough handling.
Caution
This is the end of the process of replacing the LCD board.
Chapter 12 Replacing Loading Parts in the Exterior of Main Unit
4
Remove the LCD board.
• Three screws (M3×6)
5
Install a new LCD board.
• Three screws (M3×6)
6
Confirm that the LCD board is properly installed
by pressing each button on the operation panel.
step 3.
step 2.
" Installation Procedure (Page
Panel".
12-7