Adjusting The Image Position - Konica Minolta PagePro 1390 MF User Manual

Adjusting the image position

The print image may not be straight when the ADF is used to scan the docu-
ment.
If the image is not straight, follow the procedure described below to adjust the
image position.
1
Press the Menu key.
2
Press a scroll key until
3
Press the Select key.
4
Press a scroll key until
5
Press the Select key.
6
Refer to the following table for the necessary adjustment direction.
Result
A
80
1.Common Setup
Adjust ADF Edge
A
appears on the display.
appears on the display.
Adjustment Direction (-9 ~ +9 mm)
When the image is located too far to the
right, adjust its position in the + (plus)
direction.
When the image is located too far to the
left, adjust its position in the - (minus)
direction.
Cleaning the Flatbed Glass