Konica Minolta drypro 832 Service Manual page 264

Chapter 14 Setting and Adjustment
13
Observe the center of each patch in the <1> to the <6> row of the printed ST13B PATTERN,
using a magnifying glass, and determine the number (SUB GAIN) that has the least row-by-row
horizontal streak unevenness (0.16 mm pitch) of the patches from (-6) to (+6).
Write down the number (SUB GAIN) determined on the film.
•
The number to be determined here is the one that is attached to each density patch in the ST13B test
pattern.
Note
•
When comparing patches, observe the center of each patch by scanning from the top or bottom with
the magnifying glass.
14
Specify the number (SUB GAIN) determined in
15
Click [NEXT(N)].
The "CORRECTION (STEP4)" window appears.
14-8
step 13 in each entry field.