15
Put the wire removed in
16
Install the elevating transport unit , right cover, and rear cover with reference to
Procedure (Page 6-11)"
17
Return the supply tray and tray shutter to their original positions.
Take sufficient care when handling the tray shutter, as it may be impossible to insert if it
becomes deformed due to rough handling.
Caution
This is the end of the process of replacing the elevating transport nip opening/closing HP sensor.
Chapter 6 Replacing Lispl-832 (Optional) Loading Parts
step 3
back into the slot on the bracket.
in
"6.4.1 Removing/Installing Elevating Transport
"
Installation
Unit".
6-17