Adjusting Position Of Copy Image (Image Shift); A Djusting Position Of Copy Image (Image Shift) - Konica Minolta 7165 Instruction Manual

7155e093v1.fm 46 ページ ２００１年１１月２７日 火曜日 午後４時２３分

Adjusting Position of Copy Image (Image Shift)

Use Image Shift to adjust the position of copy images, e.g. for the purpose of
creating a new binding margin on originals to make it easier for filing
purposes.
Page Space function is available only when Booklet or 2 Repeat mode of
Repeat has been already selected. Use this function to make the desired
amount of blank space between the two images on a page. See the illustra-
tion on p. 9-48 for details.
If image loss is likely, select the Reduce & Shift mode instead of regular
Image shift. See p. 9-49.
>>>Specifications for Image Shift<<<
❒ Shift amount: 0 to 250mm in 1mm increments
Setting in 0.1mm increments using up/down arrow key is also available by
Key Operator setting. See p. 13-39 to 13-45.
❒ Incompatible Conditions: AUTO Layout, Storing images in Overlay Memory
1.
Select the copy mode and paper size from the Basic Screen, as
required.
2.
Touch APPLICATION on the Basic Screen.
9-46
Up
Original
Please Be Reminded!
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].
Right
Up
Left
Down
Copies
Down
Right
Left