Table of Contents
Advertisement
3.2.2
Loading in DADF
The DADF allows you to load up to 50 sheets of documents from 148×210 mm to 297×432 mm.
Scanning for copying will begin with the topmost sheet of document and the copies will be output
facing down. This following procedure explains how to load your documents in the DADF.
Up to 40 shees of heavy weight document (101 g/m
If Next Original is selected on the screen that is displayed while scanning a document loaded in the DADF, the document will
be copied according to the initial feature settings.
Up to 1,000 pages of an A4-sized document can be scanned. Depending on the size of the document, however, an error
message may appear before 1,000 pages are scanned.
Pull out the extension tray if you are
loading large documents.
Take note of the following as they
may result in document jams or
damage your documents:
• Do not press the documents while
they are being fed into the feeder.
• Do not allow documents that have
been scanned for copying to over-
stack on the document output tray.
• Do not place any object on the
document output tray.
2
to 128 g/m
Procedure
1
Align the edges of the documents.
Remove any staples or clips.
2
Place
the
documents
facing up in the DADF
(side one facing up for 2-
sided copying), aligned to
the upper left corner of the
DADF, and as indicated by
the arrow in the diagram.
The confirmation indicator lights
up and the message, "The DADF
is selected" appears on the message area of the copier control panel.
3
Shift the document guide
gently
to
touch
document edges.
3.2 Loading Documents
2
) can be loaded.
the
45
Advertisement
Table of Contents
Troubleshooting
