Fuji Xerox 1015S Series Instruction Manual page 214

6.2 Setting Folders
When entering a Password, use the
numeric keys on the display.
If you make an input error, select
Clear and enter the Password
again.
188
When specifying Password:
You can restrict user access to the folders if you set a password for the folders.
Set Password if necessary.
Set the Password with a four-digit numeric value.
(1)Enter a Password and then select Confirm.
Entre/Change Password
Enter a new password and select Confirm.
Enter the same password again and
select Confirm.
Note: The Password must be a 4-digit number.
New Password
Confirmation
Password
Reset Confirm
(2)For confirmation, enter the same password as step 5 again
and then select Confirm.
(3)Select Close.
The display returns to the Create/Change Folder screen.
When specifying Remote Link Folder:
When this machine is connected to a network, you can specify whether to copy
a file to a link folder (Nos. 31 to 36) at the same time of saving or reprinting a
file. Specify this option if necessary.
A copied file will be saved in the shared folder in the linked machine (No. 30).
(1)Specify a folder to set as a remote link folder, and then
select Select Folder.
You can select multiple folders.
Remote Link Folder Setup
Folder Name
31 (No Name)
(No Name)
32
((No Name)
33
(No Name)
4 34
(No Name)
35
(No Name)
36
The Auto Remote Copying Setup screen appears.
Close
1 2 3
4 5
6
7 8 9
0
Clear
Cancel Save
Auto Remote Copying
Off
Off
Off
Off
Off
Off
Select
Folder