Fuji Xerox 1015S Series Instruction Manual page 162

5.22 Multiple-Documents Copying on One Copy
136
7
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
When documents are placed in the DADF:
Copies will be made on one sheet of paper according to the order the
documents are being placed in the DADF and to the specified number of
documents to be copied.
When multiple documents are loaded in the DADF, No. of Originals which
counts the document pages loaded, will increase accordingly.
When documents are placed on the document glass:
When the document placed on the document glass has been scanned for
copying, the following message appears.
Ready to copy
Load your next original and press Start or touch End Job.
Copy Job
Sets
0/ 3
No. of Originals
0
No. of Pages Printed
0
Paper Supply
Tray 1 A4 P
Reduce/Enlarge
70%
(1)Replace the sheet of document on the document glass with
the next sheet.
(2)Press Start on the control panel.
Copies will be made on one sheet of paper according to the documents used
and the specified number of documents to be copied.
(3)When 4 Images or 8 Images is being selected, repeat
Steps (1) and (2) until all the documents have been loaded.
(4)Select End Job when all the documents have been loaded.
Copies will be made on one sheet of paper according to the specified number of
documents to be copied.
Original Orientation
Output
End Job