Fuji Xerox 1015S Series Instruction Manual page 76

4.1 Basic Copying Procedures
Press the C button on the control
panel to clear any error when
entering the number of sets to be
copied. Once you have pressed the
C button, the number of sets will
return to "1". No other settings will
be changed.
To stop the scanning documents for
copying, select Stop in the screen,
and then press C(Clear). When the
Clearing Paper screen is displayed,
press Start to output the copies.
The number of copies can be
changed on the screen that appears
when a stack of documents has
been scanned or when you select
Stop. This does not apply when
copies are to be ejected together
after all pages are scanned. Refer to
" About output ejection
timing" for further details.
If Doc.>50 is On for the document
placed on the document glass, you
can continuously copy the
subsequent documents with the
previous settings. Refer to
"5.9 Loading Documents in Batches"
for High Document Volume settings.
50
6
Select Save to specify settings for other features.
7
Enter the number
copies by using
keypad.
The number of copies will be
displayed at the top right corner of
the screen.
8
Press Start.
Copies will be made.
If you select Next Original while scanning documents loaded in the DADF, you
can continuously copy the documents.
Copy Job - Scanning in progress...
Copy Job
Sets
0/ 3
No. of Originals
25
No. of Pages Printed
0
Paper Supply
Tray 1 A4 P
Reduce/Enlarge
100%
of
the
Original Orientation
Output
Program
Ahead
Stop
Next Original