Breaker Switch - Fuji Xerox 1015S Series Instruction Manual

1.2 Switching On/Off Power
Auto Start screen: When an A4 document is placed on the document glass and
three sets are to be made with no change in size.
Canceling Auto Start
To cancel an Auto Start job, select Stop on the screen or press the Stop button on the control panel
before the document is scanned.
Then press the C button and the Auto Start job will be canceled.
1.2.4

Breaker Switch

There are two breaker switches on this machine.
The breaker switch is usually at the positions shown in the diagram below. If the machine will not be
used for a long time or when moving the machine, push the switch down or to the right.
To switch it on, push it up; or to switch if off, push it down.
The power will be cut off automatically once the breaker switch detects a power leakage. Do not use the machine in such a
case.
Check that the power switch is turned off when you turn off the breaker switch.
"Safety Notes"
10
Please wait...
The copy job will start automatically.
Copy Job
Sets Original Orientation
0/ 3
No. of Originals
0
No. of Pages Printed
0
Paper Supply
Output
Tray 1 A4 P
Reduce/Enlarge
100%
Stop