Fuji Xerox 1015S Series Instruction Manual page 397

If the staples cannot be removed in
the suggested way, contact your
Customer Support Center.
Take care not to jam paper in the
cartridge when paper remains in the
finisher.
(4)If the jammed staple
cannot be removed,
push the staple in the
direction shown
remove it.
(5)Push the staple
cartridge back to the
original position.
(6)Close the cover until it
clicks.
When the booklet staple cartridge "UR2" (front) or "UR3"
(back) is used:
(1)Pressing the lever to
the right, pull out the
cartridge.
(2)Holding the tabs of the
booklet staple
cartridge, slide the
cartridge to the left to
remove.
9.4 Solving Stapling Problems
to
UR3
UR2
371