Fuji Xerox 1015S Series Instruction Manual page 346

8.5 Auditron Menu
When you have not set the account
(by department/user) data, you
cannot use the Auditron feature
even if you select On for Auditron
Mode.
Set the timer between 1 to 59
seconds in one second increments,
or between 1 to 10 minutes in one
minute increments.
"8.1.3 Entering/Exiting Auditron
Mode"
320
3
Proceed to enable/disable the Auditron Mode and set the User
Password Entry Screen Timer.
When enabling/disabling Auditron Mode:
(1)Select Off to disable or On to enable the Auditron Mode.
Auditron Administrator Mode
Auditron Setup
Auditron Mode
Off
On
When setting User Password Entry Screen Timer:
(1)Select Set Timer.
Auditron Administrator Mode
Auditron Setup
Auditron Mode
Off
On
The User Password Entry Screen Timer screen is displayed.
(2) Use to select the time, or select Disable.
Auditron Administrator Mode
User Password Entry Screen Timer
(1-59 seconds/
1-10 minutes)
2
Minutes
(3)Select Save when all the settings have been checked.
The display returns to the Auditron Setup screen.
4
Select Save when all the settings have been checked.
The display returns to the Auditron Menu screen.
5
Exit from the Auditron Administrator Mode.
User Password Entry
Screen Timer
Set Timer
2 Minutes
User Password Entry
Screen Timer
Set Timer
2 Minutes
Select the time required for the machine to
display the User Password Entry Screen after
a copy job is completed.
You can specify a time from 1-59 seconds or
1-10 minutes in 1 second/minute increments.
Disable
Save
Save
Save