Fuji Xerox 1015S Series Instruction Manual page 320

8.1 System Administrator Mode
Entering Tools Mode
"8.1.1 Using System Administrator
Mode"
For details on the Auditron
Administration mode, refer to "8.5
Auditron Menu".
The factory setting of the Tools
Password is 11111.
Each input digit is represented by an
asterisk. If you made a mistake
while entering the password, press
the C button to clear, and then re-
enter.
Select Cancel to stop the operation.
The display returns to the Menu
screen.
294
Procedure
1
Switch to the System Administrator Mode.
2
Select Tools Mode.
Tools Mode
Menu
The Tools Password Entry screen is displayed.
3
Use the keypad to enter the password.
Please enter the password.
Password Entry
Use the Numeric Keypad to enter the
Tools Password and select Confirm.
To clear the password you have entered,
press C button.
4
Select Confirm.
The Tools Menu screen is displayed.
Tools Mode
Tools Menu
Paper Tray
Attributes
Copy Defaults
Others
Tools Mode Auditron
Administrator Mode
Audio Tones Timers
Screen Layout Reduce/Enlarge
Presets
Image Quality Scan Mode
Settings
Close
Cancel
Tools Password
Confirm
Exit
Administrator
Password
Original Size
Defaults