Fuji Xerox 1015S Series Instruction Manual page 49

Paper stock that can be used
For each paper tray, use paper with the following paper weight, paper type and paper tray capacity:
Paper tray
GSM
2
Tray 1 56g/m
64 - less than
105 g/m
2
Tray 2, 3, 4 56g/m
64 - 128 g/m
2
Tray 5 (bypass) 56g/m
64 - 220g/m
2
Tray 6 (HCF) 56g/m
64 - 128 g/m
Tray 7 60 - 220 g/m
(Separators/
Cover Tray)
2
*1 GSM or g/m is a measure of the substance of paper expressed in grams per square meter, which does not depend on the number of
sheets in the ream.
*2 Ream weight is the weight of a 788×1,091 mm ream consisting of 1,000 sheets.
*3 Paper size of the paper classification mentioned here may differ in size depending on the brand.
*4 When you load heavy weight paper in the tray, set the paper type to Heavywt1 in the Tools Mode.
*5 The sizes of transparency are only A4 portrait, and A4.
*6 Use only the recommended color tab paper. If not, it may cause machine breakdown or paper jam.
Paper jams may occur if you make copies on paper that are different in size and type from those selected on the display, or if
you load the paper stock in the wrong tray. To make copies properly, select the correct paper size, paper type, and tray.
Paper weight
*1 *2
Ream weight
48kg
55 - less than 90
2 kg
48kg
2 2
55 - 110 g/m
48kg
2 2
55 - 189 g/m
48kg
2 2
55 - 110 g/m
2 2
55 - 189 g/m
Paper type
Normal S Paper
Normal Lucky Boss,
Blue Wrap, Blue, X Print
Normal S Paper
Normal Lucky Boss,
2
64 - less than 105 g/m Blue Wrap, Blue, X Print
*4
Heavywt1 X Print
2
105 - 128 g/m
Normal S Paper
Normal Lucky Boss,
Blue Wrap, Blue, X Print
Heavywt1 X Print
2
105 - 162 g/m
Heavywt2 Postcard
2
163 - 220 g/m
*5
Transparency V516, V515
Label Label (V860/V862)
Tab paper 1 Color tab paper
2
64 - 128 g/m
Tab paper 2
2
129 - 162 g/m
Normal S Paper
Normal Lucky Boss,
2
64 - less than 105 g/m Blue Wrap, Blue, X Print
*4
Heavywt1 FX-JD, X Print
2
105 - 128 g/m
- Lucky Boss,
Blue Wrap, Blue, X Print,
Color tab paper
2.1 Paper to Use
*3
Paper classification
*6
23