Fuji Xerox 1015S Series Instruction Manual page 258

6.6 Printing Files
If you have selected multiple files,
Print First Page is unavailable.
Even if multiple files are selected,
the Auto Send feature is applied to
all the files selected only once.
232
When setting Output Orientation:
You can set the output orientation of the copies.
Options are Auto, Face Up, and Face Up Reverse Order.
If Stapled/Punched or Booklet Creation is set to On, only Auto can be
selected for Output Orientation. If Transp Separators is set to On, Reverse
Order. cannot be selected. You cannot set Output Orientation if Tab Copying,
Folding, or Z Fold has already set for files.
When setting 2 Sided:
You can set the option for either one-sided or two-sided printing of a file.
Options are Auto, One-Sided, and Two-Sided.
You cannot set 2 Sided if Transp Separators, Tab Copying, Booklet Creation,
Book Duplex, or Folding has already set for files.
When setting Paper Supply:
You can specify the paper tray for printing. Only the tray with the same
orientation and size can be selected.
Options are Auto, Tray 1 to Tray 4. Tray 6 is available only when the tray 6
(optional) is installed.
5
Select Print First Page if necessary.
You can print only the first page as a sample to check the print file contents and
the print result. This sample printing does not affect the number of copies.
When Add Finishing is selected, it is recommended to check the print result.
The first page of the selected file is printed.
If there is no image for the first sheet of a document due to covers or
transparency separators, the first page having an image is automatically
searched and printed.
For a file where stapling is set, the first two pages having images are printed
and stapled. After printing, the display returns to the Print File screen.
6
Press Start or select Start Printing.
File printing starts.
If the remote link folder is set:
If reprinting is executed by specifying a folder (No.1 to 29) where the remote
link folder is registered, the File Copy Target Folder screen appears.
File Copy Target Folder (Folder No.31)
The Start Printing button has been selected. Select how you want the files to be handled
in the target folder and press Start again.
To perform Auto Print, select Enter first. Use the Numeric Keypad to enter the number
of sets you want to print and select Enter again.
To delete the file after printing, select Off for Save to File.
Note: The file will not be copied to the remote folder if Auto Print is Off.
Auto Print at
Remote Machine
Off
On
Previous
Screen
Save to File at
Remote Machine
Off
On
Start
Print Quantity at
Remote Machine
10
Enter