Specifications - Fuji Xerox 1015S Series Instruction Manual

Specifications

A
The following is a list of main specifications of Document Centre 1015S. We regret that improvements in
specifications and appearance of the product may be made without prior notice.
Standard specifications
Copier Type
Copying Method
Development Method
Document Table Type
Photosensitive Type
Fusing System
Scanning Method
Scanning Resolution
Memory Resolution
Warm-Up Time
(For 100 V model)
Warm-Up Time
(For 200 V model)
Document Size
Copy Paper Size
Copy Paper (G.S.M)
Image Loss
First Copy Time
Magnification
396
Console
Indirect electrostatic
Dry development
Fixed
Organic photosensitive conductor (OPC)
Heat roller
CCD scanning in main direction
Fast scan: 400 dpi (15.7 dots/mm)/8 bit
Slow scan: 400 dpi (15.7 dots/mm)/8 bit
Fast scan: 600 dpi (23.6 dots/mm)/1 bit
Slow scan: 600 dpi (23.6 dots/mm)/1 bit
Within 7 min (room temperature: 20°C
(Within 120 sec (room temperature 20°C): after exiting the Power Saver Mode (1 hour))
Within 6 min (room temperature: 20°C
(Within 120 sec (room temperature 20°C): after exiting the Power Saver Mode (1 hour))
Document glass: Max: 297×432 mm, Min: no limit
DADF: Max: 297×432 mm, Min: 148×210 mm
Tray 1 : A4 portrait, A5
Tray 2,3,4 : B5, B5 portrait, A4, A4 portrait, B4, A3, 8×10" portrait, 8.5×11" portrait,
8.5×11", 8.5×13", 8.5×14", 11×17", 12×18"
(Y direction: 182 to 297 mm, X direction: 182 to 432 mm)
Tray 5 (bypass) : [standard size]
postcard, A5, B5, A4, A4 portrait, B4, A3, SRA3 (320×450 mm/12.6×17.7")
5.5×8.5", 8×10" portrait, 8.5×11" portrait, 8.5×11", 8.5×14", 11×17", 12×18"
[non-standard size]
Y direction: 148 to 297 mm, X direction: 200 to 432 mm
*1,2 Contact our Customer Support Center.
*3 When copying onto paper size SRA3(320×450mm/12.6×17.7") and 12×18", adjust the paper guide in
the tray before loading the paper.
Tray 1 : 56, 64 to 105 g/m
Tray 2,3,4 : 56, 64 to 128 g/m
Tray 5 (bypass) : 56, 64 to 220 g/m
Use the recommended paper. Follow the instruction described in "Chapter 2 Loading Paper".
Lead edge 4mm or less, Trail edge 4mm or less, Both edge 4mmm or less
Document glass : 4.2 sec (A4 portrait/Tray 1/100% magnification/1-sided copying)
DADF : 6.3 sec (A4 portrait/Tray 1/100% magnification/1-sided copying)
Size-for-size 1: 1 ± 0.5%
Preset R/E 1: 0.500, 1:0.707, 1:0.816, 1:0.866, 1:1.154, 1:1.224, 1:1.414
Variable R/E
1: 0.250 to 1:4.000 (at 1% increments)
*1 *1
, B5 portrait , 8.5×11" portrait
*2
, 8 K, 16 K, non-standard sizes
2
2
2
*1
*2
*3
,
*3