Fuji Xerox 1015S Series Instruction Manual page 31

No. Name
26 Tray 6 (HCF) (optional)
27 Top cover
28 Top right cover
29 Tray 7
30 De-curl button
31 Output tray
32 Finisher tray
33 Booklet output tray
34 Booklet output tray
button
35 Right door
36 Staple cartridge for
booklet
37 Staple cartridge
38 Punch scrap container
39 Tri-Fold output tray
40 Tri-Fold output tray
button
41 Left door
42 Staple cartridge holder
Tri-Fold In and Tri-Fold Out are available only when the optional folding unit (Z and C) installed.
Load the paper.
Open to clear paper jams in tray 6.
Open to clear paper jams in tray 6. Shift tray 6 to the left to open.
Load paper for covers or transparency separators. Paper loaded in tray 7 as
cover/transparency separator will not be used for copying.
Press this button to decurl copied paper.
Receives copies output from the machine.
Receives stapled and punched copies. Copies are also output here when files
are merged, or when Large Output, Collated, or Uncollated are selected.
Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
Press this button to deliver booklets to the removal position.
Open to clear paper jams; replace staples or clear jammed staples; or replace
the scraps from the puncher.
There are two staple cartridge for booklet.
Open to replace staples or remove jammed staples.
Collects the scraps from the puncher. Open to throw away the scraps.
Receives copies when you select Tri-Fold In or Tri-Fold Out.
Press this button to open the tri-fold output tray.
Open to clear paper jam.
When you replace the staple cartridge installed to the optional staple
cartridge, you can put the replaced one here.
1.1 Main Components and Their Functions
Function
5