Fuji Xerox 1015S Series Instruction Manual page 193

The contents of the screen may
differ according to the optional
products installed.
To cancel any setting, select Cancel.
If the Tri-Fold Output Tray button is
pressed while the machine is
working, the print job will pause and
the tri-fold output tray will open. If
this happens, remove all the copies
from the tray.
3
Select the type of folding and the side to be copied.
Bi-Fold and Print Inside are selected as an example.
Folding
Off
Z Tri-Fold
C Tri-Fold
Bi-Fold
4
Select Save to specify settings for other features if necessary.
5
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
When Z Tri Fold or C Tri Fold is selected:
The copies are output to the tri-fold output tray.
Refer to "4.6 Removing Copies from the Tri-Fold Output Tray" to remove the
copies.
When Bi-Fold is selected:
The copies are output to the booklet output tray.
Refer to "4.7 Removing Copies from the Booklet Output Tray" to remove the
copies.
5.30 Outputting Bi-Folded or Tri-Folded Copies
Collect output from
Print
Inside
Print
Outside
Cancel Save
167