Tray 5 (Bypass) - Fuji Xerox 1015S Series Instruction Manual

9.2 Clearing Paper Jams
A message will appear and the
machine will not start if the tray is
not pushed in completely. If paper or
documents are still jammed at other
locations, other error messages will
be displayed.
9.2.2

Tray 5 (Bypass)

The following message will be displayed if paper is jammed at tray 5 (bypass). Follow the procedure
below to remove the jammed paper.
332
3
If the paper is torn, check that no torn pieces are left in the
machine.
4
Push the tray in slowly to
the end.
Paper Jam
1.
2.
Procedure
1
Lift the lever on the top
cover of tray 5 (bypass) to
open it.
There is a magnet in the machine
to attract and hold the top cover.
Open the top cover of Tray 5 (Bypass) and
remove the jammed sheet.
Close the cover.