Copying With Covers; Copying With Covers [Covers] - Fuji Xerox 1015S Series Instruction Manual

This feature allows you to add papers that are not used for copying the body pages, like colored or heavy
weight papers, as covers when copying.
You can specify whether or not to copy on these covers. When copying is to be done on these covers, the
cover sheet(s), added as the specified cover page(s), will be output copied with images. When copying is not
to be done on the covers, the cover sheet(s), added as the specified cover page(s), will be output blank.
Options available for this feature are:
No Covers
No covers will be added.
Front Cover Only
To copy with front covers added.
When Blank Covers is selected, copies will be output with a blank sheet of front cover. When Printed
Covers is selected, copies will be output with the first page of the document copied on the front cover.
Front & Back Covers
To copy with front and back covers added.
When Blank Covers is selected, copies will be output with a blank sheet of front and back covers.
When Printed Covers is selected, copies will be output with the first and last page of the document copied
on the front and back cover respectively.
Back Cover Only
To copy with back covers added.
When Blank Covers is selected, copies will be output with a blank sheet of back cover.
When Printed Covers is selected, copies will be output with the last page of the document copied on the
back cover.
Document
5
4
3
2
1
Load paper of the same size and orientation for the covers and the body pages.
When using heavywt 1paper as covers, load them in trays 2, 3, 4 and tray 5 (bypass). For details on heavy weight paper that
can be used, refer to "2.1 Paper to Use".
The following types of paper cannot be used: heavywt 2 (163-220 g/m
This feature cannot be combined with the following features: Bound Originals, Multiple Up, Transparency Separators, Mixed
Size Originals, Collated, and Repeat Image. However, Blank Covers can be combined with Bound Originals.
The factory setting of Tray for Covers is Tray 2. The factory setting can be changed in the Tools Mode. For details, refer to
"Chapter 8 System Administrator Mode Settings".

Copying With Covers

5.26
Front Cover Only
Last Page
6
st
1 page
5
4
3
2
1
Front Cover Only
5
3
1
6
4
2
1-sided copying
Front & Back Covers
Last Page
6 st 6
1 page
5
4
3
2
1
2-sided copying
Front & Back Covers
5
3
1
6
4
2
2
), transparency, and label.
Covers
Back Cover Only
Last Page
st 6
1 page
5
4
3
2
1
Back Cover Only
5
3
1
6
4
2
145