Image Quality - Fuji Xerox 1015S Series Instruction Manual

Measurements and then enter the values for X (horizontal) and Y (vertical) directions. The input sizes
will be displayed as OOO × OOO mm.
Item
Original Size 1 A and B series:
(Left, 2nd from top) A3, B4, A4, A4 portrait, B5, B5 portrait, A5, A5 portrait, B6, A6, Postcard,
Inch sizes:
Original Size 2
11×17", 8.5×14", 8.5×13", 8.5×11", 8.5×11" portrait, 5.5×8.5",
Original Size 3 5.5×8.5" portrait, 8×10", 3.5×5", 4×6", 5×7", 11×14"
Other sizes:
Original Size 4
8 K
(Top Center)
Input Measurements:
Original Size 5
X direction (horizontal): 10-432 mm
Y direction (vertical): 10-297 mm
Original Size 6
Original Size 7
Factory settings of Original Size 1-11:
A3*, B4*, A5*, A4*, A4 portrait*, B5*, B5 portrait*,
Original Size 8
11× 17"*, 8.5×13"*, 8.5×11"*, 8.5×11" portrait*
(Top Right)
Original Size 9
Original Size 10
Original Size 11
Others
There are three options to specify for Others.
Item
Maximum Quantity
Power Saver Off
Mode
Size Input Units

Image Quality

You can set the image quality and adjust the gradation here.
Item
Text & Photo You can change the photo and text recognition level of
Recognition the machine.
If Text is selected, text, even small prints, can be
recognized easily.
If Photo is selected, photo images of newspapers and
pamphlets can be recognized easily.
Description
Specify the desired limit to restrict the number of sets
that the machine can make.
Specify whether the Power Saver Off Mode of
Timeouts in Tools Mode is needed.
Specify the default units of measurement for originals
and paper sizes.
Description
Available options
1- 9,999 sheets (9,999*)
Disable*, Enable
Inches, Millimeters
Text to Normal* to Photo
(5 levels)
8.2 Overview of Tools Mode
* indicates the factory setting.
Available options
* indicates the factory setting.
Available options
305