Fuji Xerox 1015S Series Instruction Manual page 189

A page number is printed at a
position adjacent to the square 10
mm inside from the top, bottom, right
and left edges of paper. A customer
engineer is permitted to adjust the
printing position. The setting is
common to date printing. Consult
your Customer Support Center.
To enter the start number, select
Enter first. Use the keypad to
specify the number and select Enter
again.
A customer engineer is permitted to
change the copy management
printing size and density. Consult
your Customer Support Center.
The start number is from 1 to 9999
for printing. After 9999, the number
will return to 1 and start
incrementing again.
When printing Page Numbering:
Specify Display Format, Print On, Position and Font/Size.
Page Numbering
Display Format
1
2
1, 2, 3
-1-, -2-, -3-
P.1, P.2, P.3
When printing Set Numbering:
A serial number is printed for each set of copies. If the start number is set to 1,
1 is printed on all pages of the first copy and 2 is printed on all pages of the
second copy.
Set Numbering
Prints page numbers in the background of the copy sets.
To change the Start Number, select Enter first.
Use the Numeric Keypad to specify the number
and select Enter again.
(1)Select Enter.
The keypad on the control panel changes to the setting keys for Numbering.
(2)Enter a number by using the keypad.
4
Select Save to specify settings for other features if necessary.
5
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
5.28 Copying with Stamp or Date
Print On... Position
1
2 3
4
Top Left
All Except Top Center
Covers
All Pages Top Right
Bottom Left
Start No.
1
Bottom Center
(1-9999)
Enter
Bottom Right
Start No.
1
(1-9999)
Enter
Cancel Save
Font/Size
Gothic
Gothic (S)
Gothic (M)
Gothic (L)
Roman (S)
Roman (M)
Roman (L)
Cancel Save
163