Fuji Xerox 1015S Series Instruction Manual page 337

"8.1.2 Entering/Exiting Tools Mode"
5
Use the keypad to enter the same password that you have
entered in Step 3.
Tools Mode
Tools Administator Password
1. Key in the new password and
select Enter.
2. Key in the same password for
confirmation and select Enter.
Note: The password must be 4-12 digits.
6
Select Confirm.
The change of password will not be carried out if the same password is not
entered for Step 3 and 6. If you made a mistake while entering the password,
press Reset and proceed from Step 3 again.
Tools Mode
Tools Administator Password
1. Key in the new password and
select Enter.
2. Key in the same password for
confirmation and select Enter.
Note: The password must be 4-12 digits.
7
Select Close.
The display returns to the Tools Menu screen.
8
Select Exit to exit Tools Mode.
8.3 Setting Tools Mode
New Password
Confirmation Password
Reset Confirm
New Password
Confirmation Password
Reset Confirm
Close
Close
311