Fuji Xerox 1015S Series Instruction Manual page 116

5.4 Sorting Output
"3.2 Loading Documents"
If you are using the DADF to copy
more than 51 sheets of documents,
load the documents in batches. By
using the High Document Volume
feature, you can load documents in
batches and yet copy them with the
same settings. For details, refer to
"5.9 Loading Documents in
Batches".
90
Procedure
1
Load the documents.
2
From Finishing, select how the copies are to be sorted.
Basic Added
Features Features
2 Sided
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
3
Select how the copies are be sorted.
Check Original Orientation.
Ensure that the correct orientation is selected.
Finishing
Auto
Collated
Stapled/Punched
Uncollated
4
Select Save to specify settings for other features if necessary.
5
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
Copies delivered to the finisher tray are divided into two stacks, forward and
backward. When Off is selected for Large Output, the copies are delivered to
the output tray without being offset even if Auto is selected.
Image Quality Output Format
Reduce/Enlarge Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
Large Output Punching Original Orientation
Off Off
On Left
2 Holes
Top
2 Holes
Right
Z Fold
2 Holes
Left
4 Holes
Top
4 Holes
Right
4 Holes
Stored
Job Templates
Original Type
Text
(Normal Text)
Mixed Size
Originals
Off
Finishing
Auto
Lighter/Darker
Cancel Save
Head to Top
Head to Left
Off
On
Large paper is
folded to align
with paper
edges.