Table of Contents
Advertisement
This section explains how to load your documents on the document glass or in the DADF.
3.2.1
Loading on Document Glass
The following procedure explains how to load document on the document glass.
When using the document glass, options like 2 -> 2 Sided and 2 -> 1 Sided cannot be selected.
If documents are placed one at a time on the document glass and the copies will be stapled, Doc.>50 must first be set to On.
Refer to "5.9 Loading Documents in Batches" for High Document Volume settings.
Place a sheet of white paper on the
document if it is a highly transparent
material like transparency or tracing
paper.
44
Loading Documents
3.2
Procedure
1
Lift
cover.
2
Place the document face
down and align it with the
upper left corner of the
document glass.
3
Lower
cover.
When
document,
excessive force to press it
against the document glass.
The glass may break and
injure you.
When making copies with the
document cover open, do not
look directly at the copy lamp.
It might tire or hurt your eyes.
up
the
document
the
document
copying
a
thick
do
not
use
Advertisement
Table of Contents
Troubleshooting
