Fuji Xerox 1015S Series Instruction Manual page 416

10.6 Emptying Punch Scrap Container
When the punch scrap container
has been pulled out even slightly,
ensure that all the scraps are
discarded. If there are scraps
remaining, the container may be full
before the next message is
displayed, and this may cause
machine breakdown.
If the front door of the machine is not
closed properly, error message will
remain and the machine will not start.
390
3
Discard all the scraps.
4
Push the empty punch
scarp container all the way
back.
5
Close the right door of the finisher.