Basic Copying Procedures - Fuji Xerox 1015S Series Instruction Manual

"5.2 Enlarging/Reducing Image"
"5.3 Selecting Paper Tray"
When Auto % is selected for
Reduce/Enlarge or Auto for Paper
Supply, the document image will be
rotated to fit the orientation of the
paper loaded for copying. However,
this is only applicable when a
standard-sized document is being
copied to a standard-sized paper of
A4 or smaller. For non-standard
paper sizes, the image cannot be
automatically rotated.
"5.19 Specifying Document Type"
You can choose from seven levels of
copy density to adjust the density of
your output. The factory setting is
Normal. For details, refer to "5.18
Adjusting Copy Density".
3
Select a percentage from Reduce/Enlarge, and Select a
paper tray from Paper Supply.
If you select Auto, a paper size matching the size of the document will be
automatically selected.
Basic Added
Features Features
2 Sided
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
4
Select your document type from Original Type on the Image
Quality screen.
Basic Added
Features Features
Image Quality Presets
Normal
Background
Suppression
Auto
Contrast
5
Select an option according to your document type.
Original Type
Text & Photo
Text
Photo
Map

4.1 Basic Copying Procedures

Image Quality Output Format
Reduce/Enlarge Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
Image Quality Output Format
Lighter/Darker
Lightest
Auto
Normal
Darkest
Normal Text
Pencil Text (Black)
Stored
Job Templates
Original Type
Text
(Normal Text)
Mixed Size
Originals
Off
Finishing
Auto
Lighter/Darker
Stored
Job Templates
Original Type
Text
(Normal Text)
Density Control
Normal
Sharpness
Normal
Cancel
Save
49