Setting Tools Mode; Changing Tools Mode Settings - Fuji Xerox 1015S Series Instruction Manual

This section explains how to specify the Tools Mode setting.
8.3.1

Changing Tools Mode Settings

The following procedure explains how to specify basic Tools Mode settings, using the default values
of the features as an illustration. Use the same procedure to specify other settings not mentioned
here. For information on specifying the Tools password, refer to the other procedures/sections
following this.
"8.3.2 Changing Tools Password"
"8.1.1 Using System Administrator
Mode"
"8.1.2 Entering/Exiting Tools Mode"
You can also directly select a feature
by touching it on the display. Also,
you can touch Previous Page or
Next Page to display the previous/
next screen.
308

Setting Tools Mode

8.3
Procedure
1
Display the Tools Mode screen.
2
Select Copy Defaults.
Tools Mode
Tools Menu
The Feature Defaults screen is displayed.
3
Use
Tools Mode
Copy Defaults
Paper Supply
Cover Supply
Reduce/Enlarge
Original Type
Text & Photo (Photo Area)
Photo Type
Text Type
Lighter/Darker
Paper Tray Audio Tones
Attributes
Copy Defaults Screen Layout
Others Image Quality
to select the required feature.
Items Current Settings
Auto
Tray 2
100%
Text
Halftone
Halftone
Normal Text
Auto
Exit
Timers Administrator
Password
Reduce/Enlarge Original Size
Presets Defaults
Scan Mode
Settings
Close
1/4
Previous Page
Next Page
Change
Settings