Select Start - Fuji Xerox 1015S Series Instruction Manual

In Build Job mode, Collated and
Uncollated cannot be selected.
You can use registered settings of
Stored Job Templates for Build Job.
However, the setting of Build Job
cannot be programmed in the
memory.
Settings for documents that have
been scanned for copying cannot be
changed.
5.32 Copying Documents of Different Settings (Build Job)
4

Select Start.

The Build Job Start screen appears.
The example used in this explanation assumes that Annotation, Covers,
Separators, and Finishing options are not selected.
5
Specify settings for copying.
Build Job selected -- Ready to copy
Basic Added
Features Features
2 Sided
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
To cancel the current selections:
When you press Clear All, the screen for canceling settings is displayed.
Follow the instructions displayed on the screen.
6
Press Start on the control panel.
The scanning of documents for copying will begin.
Copy Job - Scanning in progress...
Copy Job
No. of Originals
45
Paper Supply
Tray 1 A4 P
Reduce/Enlarge
100%
Once the scanning is completed, the display will return to the Build Job screen.
Image Quality Output Format
Reduce/Enlarge Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
Original Orientation
Output
Original Count 0
1
Quantity
Stored
Job Templates
Original Type
Text
(Normal Text)
Mixed Size
Originals
Off
Finishing
Auto
Lighter/Darker
Original Count 50
Stop
175