Fuji Xerox 1015S Series Instruction Manual page 396

9.4 Solving Stapling Problems
Open the staple cartridge cover only
when removing the bent staple. If
you do not remove the bent staple, a
staple jam may occur as a result.
370
Procedure
1
Check that the machine
has stopped and then
open the right door of the
finisher.
2
Remove the staple cartridge.
"UR1"
(1) Lift up the lever as
shown in
diagram.
(2)Pull the
cartridge.
(3)Open the
cartridge cover
shown in the diagram
and remove
jammed staple.
When removing the staple, be
extra careful not to injure your
fingers.
the
staple
staple
as
the