Output Area Of Finisher - Fuji Xerox 1015S Series Instruction Manual

9.2 Clearing Paper Jams
9.2.10

Output Area of Finisher

Here, we explains how to remove jammed paper at the output area of the finisher. The explanation is
divided into: "Paper jam at output tray"; "Paper jam at finisher tray"; Paper jam at booklet output tray".
Paper jam at output tray
The following message will be displayed if paper is jammed. Follow the instructions below to clear the
jammed paper.
If the front door is not closed
completely, an error message is
displayed and the machine will not
start.
362
Paper Jam
1.
2.
3.
Procedure
1
Remove
paper from the output tray.
2
If the paper is torn, check that no torn pieces are left in the
machine.
3
Open and Close the right door of the finisher until the
message disappears.
Remove jammed sheets from the Output Tray.
Open and Close Finisher right door.
Move Lever R14a and turn Knob R13 clockwise.
Remove jammed sheets.
Return Lever R14a to original position.
Close Finisher right door.
the jammed