Fuji Xerox 1015S Series Instruction Manual page 439

Document setting
Copies result
*1
Orientation
on DADF
*1: Displays condition when front cover is added for Copies result with stapling setting.
*2: Displays document orientation when using DADF only. When using document glass, set as follows:
Head to Top
*3: For information on stapling setting, refer to "5.5 Stapling".
*4: For information on document orientation, refer to "5.14 Specifying Image Orientation".
*5: For information on output orientation, refer to "5.24 Outputting Face Up/Down".
*6: When Tray 7 is selected together with the staple option, staple positions enclosed in bold rules in the table are not available. This
limitation can be changed by a customer engineer. Contact your Customer Support Center for information.
Original
Staple
orientatio
*2 *3
*4
n
Head to
Top
Top
Left
Head to
Left
Head to
Top
Top
Right
Head to
Left
Top Head to
Double Left
Left Head to
Double Top
Right Head to
Double Top
Head to Left
C Originals/Copies Orientation (With Covers)
Copy paper setting
Tray 7 not
Output
selected
orientatio
*5
n
Tray 5
Face
Down
Copies
are output
facing
down.
*6
Tray 7 selected
Tray 5 Tray 7
413