Fuji Xerox 1015S Series Instruction Manual page 218

6.2 Setting Folders
About the Auto Print function
A file is automatically printed when a linked machine transfers the file to the shared folder with Auto
Print feature enabled.
Even if the machine is not connected to a network, you can also use the shared folder for print
reservation because a non-output file is automatically printed when the file is copied or moved to
this folder.
The Auto Print function prints files in the order of storage when there are no jobs in progress. If a
non-output job cannot be printed, the machine automatically tries to print the job again after the time
set at Auto Print Retry Interval. This is repeated again and again until the file is printed.
If a file transferred from the linked machine is set to OFF at Save to File, the file is automatically
erased after printing. A file reprinted manually from the shared folder of this machine is also
deleted.
192
When setting Auto Print Retry Interval:
For Print Retry Time, see the message displayed on the following screen.
(1)Enter the time interval by using the keypad and select
Save.
Auto Print Retry Interval
Sets the interval in which the machine tries to perform Auto Print.
Auto Prints is not possible when the machine is not in Clear All mode.
Use the Numeric keypad to enter the time value.
The display returns to the Create/Change Folder screen.
5
To finish the settings, select Save or Close continuously until
the display returns to the copy screen.
0 minutes
(0, 1-60) Disabled when value is 0
Cancel Save