Fuji Xerox 1015S Series Instruction Manual page 343

If you enter "0" for the copy limit,
nothing will be shown in the Copy
Limit display and no copy limit
setting is made. Also, if no value is
entered, no copy limit setting is
made.
If you made a mistake while entering
the password, press the C button to
clear and then re-enter.
"8.1.3 Entering/Exiting Auditron
Mode"
When setting/modifying the copy limit:
(1) Select Key in Copy Limit.
Auditron Administrator Mode
To create or modify account data, use the Up/Down arrows
or key in the Account Number and select confirm.
Modify Account Number : 400
User Password
12345
Key in
Password
Confirm
The input area is blank.
(2)Using the keypad, enter 0 or a value within the range of 0 to
6,553,500 in increments of 100, and then select Confirm.
The input number is shown in the Copy Limit display. The input area will remain
as blank if you entered "0".
6
Select Close when all the settings have been checked.
The display returns to the Review Accounts screen.
7
Select Reset Copy Volume to reset the current copy volume.
Auditron Administrator Mode
To create or modify account data, use the Up/Down arrows
or key in the Account Number and select confirm.
Create/Modify Accounts
Account Number
(100-2099)
400
Key in Account
Number
Confirm
"0" is displayed in the Copy Volume display.
8
Repeat Steps 3 to 7 to modify the settings of other accounts.
9
Select Close when all the settings have been checked.
The display returns to the Auditron Menu screen.
10
Exit from the Auditron Administrator Mode.
8.5 Auditron Menu
Copy Limit (x 100)
Key in
Copy Limit
Confirm
User Password
Copy Limit Copy Volume
Modify
Reset
Account Data
Copy Volume
Close
Close
317