Fuji Xerox 1015S Series Instruction Manual page 398

9.4 Solving Stapling Problems
If the right door of the finisher is not
closed completely, error message
will remain and the machine will not
start.
372
(3)Remove the jammed
staple as shown in the
diagram.
When removing the staple, be
extra careful not to injure your
fingers.
(4)Holding the tabs of the
booklet
cartridge, return
cartridge to the original
position and
push it until it clicks.
(5)Push the cartridge back
to the original position.
3
Close the right door of the finisher.
staple
the
gently