Z-Folding; Z-Folding [Finishing] - Fuji Xerox 1015S Series Instruction Manual

Z-Folding

5.7
When the optional folding unit (Z and C) is installed, the feature allows you to make Z-folded
copies.
This section explains how to Z-folded copies using the Mixed Size Originals and stapling/punching features as
an example.
Available paper sizes for Z-folding are B4, A3, 11×17", and 8 K.
The Z Fold option cannot be selected with Output Orientation, Transparency, Book Duplex, Booklet Creation, or Folding.
"3.2 Loading Documents"
Document
Procedure
1
Load the documents.
When loading the same size documents:
(1)If necessary, select Reduce/Enlarge and/or Paper Supply
on the Basic Features screen.
(2)Proceed to Step 2.
When loading mixed-size documents:
Load only the documents with the same length for the edge to be inserted into
the DADF. For example, load A4 portrait and A3 together, or B5 portrait and B4.
The larger size copies will be Z-folded. For example, when you load an A4
portrait sheet with an A3 sheet, the A3 copy will be Z-folded.
Documents of various sizes
When loading mixed-size documents into the DADF and stapling the copies, Z-
holding can be performed only for available size sheets and stapling is
cancelled for all the sheets.
Finishing
Copy
Copy
Optional
97