Fuji Xerox 1015S Series Instruction Manual page 118

5.5 Stapling
When tray 7 is selected in the copy settings, staple positions are limited as follows. This limitation can be changed by means of
a customer engineer setting. Contact our Customer Support Center for details.
• When Head to Top is selected for document orientation: The left side (Top Left × 1 or Left × 2)
• When Head to Left is selected for document orientation: The top side (Top Left × 1 or Top × 2)
The Transparency option cannot be selected together with Repeat Image.
If you are stapling Z-folded copies, the number of sheets that can be stapled is reduced.
"3.2 Loading Documents"
When loading mixed-size
documents, align the Y-direction
edges of the documents.
92
Procedure
1
Load the documents.
2
From Finishing, select how the copies are to be sorted.
Basic Added
Features Features
2 Sided
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
3
Select Collated/Stapled/Punched.
Finishing
Auto
Collated
Stapled/Punched
Uncollated
Image Quality Output Format
Reduce/Enlarge Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
Large Output Punching Original Orientation
Off Off
On Left
2 Holes
Top
2 Holes
Right
Z Fold
2 Holes
Left
4 Holes
Top
4 Holes
Right
4 Holes
Stored
Job Templates
Original Type
Text
(Normal Text)
Mixed Size
Originals
Off
Finishing
Auto
Lighter/Darker
Cancel
Save
Head to Top
Head to Left
Off
On
Large paper is
folded to align
with paper
edges.